Windows 10 usb install freezes free download

Hi Mike. Make sure all other drives and peripherals are unplugged. If you’re using another PC to do this then uncheck the box for Recommended Settings to choose the exact version and bit rate for the target PC only.

Make sure to follow the setup steps in the first link tutorial to complete your install. Drivers are important enough that those steps are printed in red. You will get and keep the best possible install to the exact extent you stick with the steps, tools and methods in the first linked tutorial.

It’s a better install than any amount of money could buy and a great learning experience that will make you the master of your PC.

I hope this helps. It always block at the windows blue logo without spinning circle , or when in legacy mode, pass the blue windows logo but freeze on the black screen with “-” ticking forever. I even removed all my hardware and checked everything. This is a mystery and I cannot solve the pb. On a windows 10 computer right click the iso of Windows 10 and select Mount. Attach the flash drive to the computer you want to install Windows 10 on and boot while tapping the key for your boot menu.

What is the make and model of the computer? I would turn CSM off. The computer is a custom build, desktop. Will try that when I’ll be back home and will let you know. In the meantime, with the latest Win10 Iso available, isn’t it going to be an issue to put the files onto a FAT32 partition due to size of certain files?

Will try anyway, asking just out ofcuriosity. Posted 13 May – AM. Did you get the iso using the iso option of the Media Creation Tool? If you did then there will not be a problem as the install. If downloaded the iso file without using the Media Creation Tool then you will not be able to copy to a FAT32 flash drive as install.

Posted 14 May – PM. Followed the instructions, but didn’t work unfortunately. I’m wondering at this stage if I don’t have a hardware pb. A live Linux Distro will boot and I managed to save my data which also make me thing that the hardware condition might be ok actually but I’ve literally tried all mehtods possible and it just refuses to boot from usb tried different devices.

Posted 15 May – AM. That is strange a live linux distro will boot but Windows 10 will not. I wouldn’t have a clue why that is especially because of all the thing you tried to boot a Windows 10 iso. Step 2: Go to Repair your computer , enter the Choose an option screen and choose Troubleshoot. Step 3: Click Command Prompt in the Advanced options page. When your PC is stuck in getting Windows ready every reboot, performing Windows Startup Repair might be able to fix the issue.

Windows Automatic Repair not working! Read this post to find how to solve Windows couldn’t load correctly and Automatic Repair couldn’t repair your PC. An erroneous recent update might confuse Windows to get stuck in another update loop, so uninstalling these updates may fix the issue. This will need to be done through the Safe Mode.

Then go to Programs and Features. Step 3 : Click View installed update in the left panel. If none of the above methods can help you out of getting Windows ready stuck issue, the operating system may have unfixable issues. The final solution will be installing a fresh copy of Windows. Windows clean install will erase some of your personal files. Thus, make sure you have backed up important data from the system partition or the Desktop.

Also, have your license key ready. Then, select a destination path to store the backup image file. This software specifies a folder for you by default, but you can also specify a location like an external hard drive or USB drive. Step 3 : Click Install now and follow the instructions on the screen.

The PC does not have enough space to install Windows 10 updates. Free up space on the OS partition and try again. There is a problem with the download or installation files in the update. No action is needed; the system will try again later. A previous update is still in the cleanup process, usually awaiting a restart. Try restarting Windows and then attempt to install the new update again.

If it fails, try using the Disk Cleanup utility, restart the PC, then attempt to update again. The current drive does not support a specific disk operation.

See detailed Windows 10 requirements to ensure the disk partition or volume can meet any of those applicable requirements. If not, replace the drive. Windows 10 Update cannot find a specific file, whether it is due to access rights, conflicting applications, or other plugged-in drives. Turn off any firewalls and close running applications.

A driver issue caused a problem during the installation of the update. Disconnect all unnecessary devices such as USB drives, cameras, etc. Windows Update terminated unexpectedly due to an existing running process that interfered with operations.

Windows 10 install: Booting from usb freezes – Microsoft Community

The computer then begins to attempt booting from the USB and the problem is that the Windows 10 logo appears but with no loading icon the little loading circles and the process freezes there. I have waited up to 30 minutes, but no luck. There were some articles and videos I came across that claimed to solve this problem but reading the comments and the feedback proved that said “solutions” were in fact opinions and not technical solutions.

So I passed on those. I’d like to start using 64 bit applications which is why I need to start running Windows on 64 bit but I’m not sure what else to check and try here. Besides, I am not an advanced user. I am interested in correcting the problem rather than going around it. Start your system as is I assume it starts , update BIOS to whatever is the newest version and all other drivers.

Use the Manufacturer’s driver update application to do this. Now back up all your data, email, favorites and so on. Make sure you have everything. If you have a file of software keys make sure you get that. Be certain about your backup because converting to bit is like starting over like starting over with a new drive.

That will allow you to install Windows 10 bit. Licensing will be OK from the Licensing Server. Booting from a USB is a very simple process and when something does not go right – considering the boot USB has been created as per the providers instructions – try creating a boot USB using another method. In my case the official Microsoft tool wouldn’t work, but Rufus did. If I had tried Rufus first, I would have saved myself a lot of time. Sign up to join this community.

The best answers are voted up and rise to the top. Stack Overflow for Teams — Start collaborating and sharing organizational knowledge. Create a free Team Why Teams? Learn more about Teams. Asked 2 years, 3 months ago. Modified 1 year, 8 months ago. Viewed 10k times. The Problem I have a desktop computer running Windows 10 Pro 32 bit. I read somewhere that the problem may have been outdated BIOS software but I don’t remember where from. I checked this link out but I didn’t try it as our intent is different so I’m not sure if this will work for me.

I investigated the problem using Google and YouTube and although many different solutions exist, they all refer to different setups and different boards. One particular video stated that removing the graphics card would correct the problem but it doesn’t seem right so I didn’t try it. The computer is a custom built one built in Windows 10 was installed as 32 bit by upgrading from Windows 7.

I have only ever done Windows updates when the PC prompted me to do so and have never altered any further settings. Happy to provide any further info if needed. Improve this question. Nikos Nikos 1 1 gold badge 2 2 silver badges 11 11 bronze badges.

I also recommend capturing a WIM of the current OS partition prior to re-installing you can do so when you boot the Install USB , see Imaging section you could actually follow all the steps in that answer to reinstall Windows – at 4, continue with the install and don’t cancel. By now if you have already successfully installed Windows 10 64 well and good, if not and yet to try any more options I suggest you first check the following. Now run the Windows 10 installation from USB.

Fortunately, here are five workarounds you can try out below. Yes, you read that right. The easiest working fix is to wait for some time. This is actually the method that some of Microsoft’s support technicians advise. The system may take some time to complete these tasks depending on the number of programs installed on your PC. Thus, to let your computer boot properly, the first thing you can do is to wait until the system tasks are finished. However, if you still see the screen, you should try other solutions to troubleshoot getting Windows ready Windows 10 loop or Windows 11 getting ready stuck.

Power resetting your PC can clear all the information in the memory, but this won’t damage the disk data. This method could help fix certain corruption issues on the computer. Step 2 : Disconnect all peripheral devices including USB flash drives, external hard drives, earphones, etc. Also, unplug the power cable or adapter from your PC. Step 3 : If you are using a laptop and the battery is detachable, remove the battery from the battery compartment.

Step 4 : Press and hold the Power button on your computer for about 30 seconds to drain all the remnant charge from the capacitors. Step 5: Connect the power cable back to the PC or insert the battery into your laptop. However, don not re-plug any of the USB devices. Step 6: Press the Power button to boot your PC. Configure the language, time, keyboard method, and click Repair your computer.

If you have a system image, choose System Image Recovery under the Advanced options tab. Then, restore your computer to its earlier state using the image backup. Free Download. Sometimes Window’s need to get ready for update at every reboot may be caused by the corrupted files on your computer. Step 1 : In the same way as above, insert the installation disc or USB drive into your PC and boot it from this drive.

Step 2: Go to Repair your computer , enter the Choose an option screen and choose Troubleshoot. Step 3: Click Command Prompt in the Advanced options page. When your PC is stuck in getting Windows ready every reboot, performing Windows Startup Repair might be able to fix the issue. Windows Automatic Repair not working!

Read this post to find how to solve Windows couldn’t load correctly and Automatic Repair couldn’t repair your PC. An erroneous recent update might confuse Windows to get stuck in another update loop, so uninstalling these updates may fix the issue. This will need to be done through the Safe Mode. Then go to Programs and Features. Step 3 : Click View installed update in the left panel. If none of the above methods can help you out of getting Windows ready stuck issue, the operating system may have unfixable issues.

The final solution will be installing a fresh copy of Windows. Windows clean install will erase some of your personal files. Thus, make sure you have backed up important data from the system partition or the Desktop.

Windows 10 usb install freezes free download

 
That is a good suggestion. Will also try Rufus to pupt Hiren’s Boot Pe on the usb. Sheldon Cooper. Need an account? The Problem I have a desktop computer running Windows 10 Pro 32 bit. In closing, Windows 10 can sometimes run into problems when updating.

Windows 10 usb install freezes free download. 7 Solutions to Fix Getting Windows Ready Stuck in Windows 10/11 [MiniTool Tips]

Attach the flash drive to the computer you want to install Windows 10 on and boot while tapping the key for your boot menu. What is the make and model of the computer? I would turn CSM off. The computer is a custom build, desktop. Will try that when I’ll be back home and will let you know. In the meantime, with the latest Win10 Iso available, isn’t it going to be an issue to put the files onto a FAT32 partition due to size of certain files?

Will try anyway, asking just out ofcuriosity. Posted 13 May – AM. Did you get the iso using the iso option of the Media Creation Tool? If you did then there will not be a problem as the install. If downloaded the iso file without using the Media Creation Tool then you will not be able to copy to a FAT32 flash drive as install.

Posted 14 May – PM. Followed the instructions, but didn’t work unfortunately. I’m wondering at this stage if I don’t have a hardware pb.

A live Linux Distro will boot and I managed to save my data which also make me thing that the hardware condition might be ok actually but I’ve literally tried all mehtods possible and it just refuses to boot from usb tried different devices. Posted 15 May – AM. That is strange a live linux distro will boot but Windows 10 will not.

I wouldn’t have a clue why that is especially because of all the thing you tried to boot a Windows 10 iso. Just curious but can you get a HirenPE iso to boot? This is based on Windows Possible solution – See this thread and last reply. If the linux distro has Gparted you can use it to create the partition and copying the files from the USB Windows 10 flash drive. Then Click Save Changes. This problem can also be caused by a outdated, incorrect or corrupt system driver. Driver Easy will automatically recognize your system and find the correct drivers for it.

But with the Pro version it takes just 2 clicks and you get full support and a day money back guarantee :. If all else fails, you may have to reset Windows , or maybe even reinstall it together. We all know reinstalling will delete all the data on your hard drive, you have to back up all your important files before doing it. Reimage can reset Windows to the state exactly when it was just installed without affecting third-party software.

Details required :. Cancel Submit. Hi Mike. Make sure all other drives and peripherals are unplugged. If you’re using another PC to do this then uncheck the box for Recommended Settings to choose the exact version and bit rate for the target PC only. Make sure to follow the setup steps in the first link tutorial to complete your install.

Drivers are important enough that those steps are printed in red. You will get and keep the best possible install to the exact extent you stick with the steps, tools and methods in the first linked tutorial. This setback has been a widespread issue for the OS since Microsoft dropped their quality assurance team and relied on users through preview builds, feedback, and more.

Other times, the OS fancies doing its own thing for a while, slowing your eagerly awaited update to a crawl. Other than those two situations, the OS may run into an installation bug or data problem that stops it in its tracks. If Windows Update freezes or gets stuck, there are several steps to try. The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for and detect problems within your system, which can take a few minutes to complete.

Turn off the two Windows Update services and then try to delete the files again. Once the folder has been emptied, restart your computer or manually turn on the Windows Update services. To do this, bring up the command prompt admin and type:. Once the updates have been installed, Windows will schedule a restart time, although you can always restart immediately.

The following fix is a convenient way to execute several commands in one swoop. It may or may not work for you. Use it at your own risk! The script above allows Windows to create new update folders and data to eliminate file corruption or incompatibilities. If none of the above options fixed your Windows Update problem, it is time to decipher the codes to discover the cause of failure—hopefully!