“How much is one veneer?” sounds like a simple question. In practice, the answer depends on the material, the number of teeth, the health of your mouth and what the clinic includes in its quotation. This guide explains the prices you may encounter and how to compare them responsibly.
Quick answer: In publicly listed Pakistan examples reviewed in September 2026, composite veneers were advertised from PKR 8,000–30,000 per tooth across different providers, conventional porcelain from PKR 25,000–50,000, and E-max from PKR 40,000–70,000. These are a small selection of advertised figures, not a national average or Dr. Shahzad Mirza’s fees. Only a written, patient-specific estimate can confirm your cost.
What does “price per tooth” mean?
A per-tooth price generally describes one veneer applied to one existing tooth. It does not automatically tell you the final treatment cost. Six veneers at the same unit price cost more than one; examinations, treatment of decay or gum disease, whitening, temporary restorations or a night guard may also affect the quotation. Ask for a written breakdown rather than multiplying a headline number without checking what it includes.
Dental veneers are tooth-coloured coverings placed mainly over the visible front surface of teeth. Composite resin may be shaped directly in the mouth, while ceramic veneers are commonly made outside the mouth and bonded later. Veneers can change the appearance of a chipped, stained or irregularly shaped tooth, but they do not replace a missing tooth or move teeth into a new position.
Veneers cost in Pakistan: published examples by type
Different clinics publish different prices, and their treatment packages may differ. The figures below are specific examples from provider websites reviewed in September 2026. They should help you frame questions, not serve as an official nationwide tariff or a quotation from another dentist.
| Veneer type | Published examples | What the material generally involves |
|---|---|---|
| Direct composite | Dr. Saad: 8,000–20,000; Odonto: from 12,000; Dreamworks: 20,000–30,000. | Resin shaped and bonded to the tooth; can be easier to repair but more prone to staining and wear. |
| Conventional porcelain | Dr. Saad: 25,000–50,000; Odonto feldspathic: from 35,000. | Custom laboratory-made ceramic; tends to resist staining better than composite. |
| E-max ceramic | Dr. Saad: 40,000–70,000; Odonto: from 45,000; Dreamworks: 40,000–60,000. | A ceramic material used for custom veneers; material choice alone does not determine the result. |
These sites are independent providers. Their figures may change, describe different inclusions or reflect different cities and clinical cases. Dr. Shahzad Mirza’s veneer service page does not publish a current price list; request his clinic’s direct quotation.
The term porcelain describes a broad family of ceramics, while E-max is a particular ceramic system. Avoid treating every advertised “porcelain veneer” as the same product. Ask which material is proposed, why it suits your teeth and who will fabricate the restoration.
What could a full smile cost?
The number of veneers should follow the treatment plan, not a standard package. Some patients need only one tooth treated; others may consider several visible teeth. A useful first calculation is number of teeth × quoted unit price, followed by any separately priced care. The table uses PKR 45,000 purely as an arithmetic example; it is not a clinic quotation.
| Number of teeth | Basic calculation | Illustrative subtotal |
|---|---|---|
| 1 tooth | 1 × 45,000 | PKR 45,000 |
| 4 teeth | 4 × 45,000 | PKR 180,000 |
| 6 teeth | 6 × 45,000 | PKR 270,000 |
| 8 teeth | 8 × 45,000 | PKR 360,000 |
Actual quotations may use a different unit price, include package terms or require preparatory treatment. “Full set” is especially imprecise: ask how many upper and lower teeth the proposal covers. Paying for extra veneers that are not clinically or visually needed is no bargain.
Key factors that change the final quote
| Factor | Why it matters | Ask the clinic |
|---|---|---|
| Material and technique | Direct composite and laboratory-made ceramics have different processes and costs. | Which exact material is being recommended? |
| Number of teeth | More teeth raise the total even if the unit price is similar. | Why does each listed tooth need treatment? |
| Current oral health | Decay and gum disease should be treated before cosmetic veneers. | What preliminary care is needed and what will it cost? |
| Planning and laboratory work | Scans, design, temporary veneers and custom fabrication may be included or itemised. | Which steps are part of the quoted fee? |
| Bite and aftercare | Grinding, repairs and follow-up can influence long-term expense. | Is a guard or review visit recommended and included? |
Material: Composite may have a lower initial fee, while porcelain typically costs more. The American Dental Association notes that composite can be easier to repair but is generally less resistant to stains and wear. Choose based on suitability and the overall plan rather than assuming the highest-priced material is automatically best for every tooth.
Preparation: A patient with untreated decay, gum disease or another concern should address it before veneers. If the natural teeth are discoloured, you may also discuss whether whitening is preferable or should happen before selecting the veneer shade. These steps can change both the timeline and final bill.
Clinical work: Complex shape changes, existing restorations and bite problems may need more planning. A clinic may include a scan, temporary veneers, laboratory work and review visits in one fee; another may itemise them. Compare the complete proposal, including what happens if a veneer chips or needs replacement.
Is the cheaper option always cheaper over time?
Not necessarily. An initial price does not describe how long a particular veneer will remain satisfactory, whether it will stain, or how much a future repair may cost. Conversely, a higher price does not guarantee a better clinical outcome. Your habits, bite, maintenance and quality of the individual treatment all matter.
Ask what happens if a veneer loosens or chips after fitting. Composite may be simpler to repair, while ceramic may need specialist repair or replacement. Avoid treating published lifespan figures as warranties. The goal is an option you understand and can maintain, with healthy natural teeth underneath.
Questions to ask before accepting a veneer quote
- How many teeth do you propose treating, and why those teeth?
- What is the exact material and preparation planned for each tooth?
- Does the fee include examination, scans, temporaries, laboratory work, bonding and follow-up?
- Do I need gum treatment, fillings, whitening or another procedure first?
- What are the repair or replacement terms if a veneer is damaged?
- Would bonding, whitening, aligners or a crown better address my main concern?
These questions matter because veneer treatment may involve removing enamel, which does not grow back. The American Dental Association advises treating dental disease before veneers and checking issues such as grinding or a deep overbite. A qualified dentist should examine your teeth before promising a result or giving a final cost.
If you are researching veneers cost in Pakistan, the practical next step is a diagnosis and a written estimate. In Lahore, you can also compare veneers with crowns and review composite bonding as you discuss options. A transparent quote should explain the treatment, not simply list a price.
Considering veneers in Lahore? Read about Dr. Shahzad Mirza’s veneer service and contact the clinic for an individual assessment and current written pricing.
Sources and pricing note
Clinical guidance: American Dental Association, Veneers. Price examples, reviewed September 2026: Dr. Saad Irfan Dentistry, Odonto, Dreamworks Dental Studios. These advertised figures are not a representative national survey and may change. Clinical and price details should be checked by Dr. Shahzad Mirza before publication.
Frequently asked questions
How much does one veneer cost in Pakistan?
Published examples reviewed in September 2026 range from PKR 8,000 to 30,000 for direct composite and PKR 25,000 to 70,000 across different porcelain and E-max listings. This small sample is not a national average; your individual quote may differ.
Are composite veneers cheaper than porcelain veneers?
Generally, yes in the examples above. Composite can cost less initially and may be easier to repair, while porcelain usually has greater resistance to staining and wear. Suitability depends on the tooth and desired result.
How much would six veneers cost?
Multiply the written per-tooth quote by six, then add any separately charged care. For illustration only, six veneers at PKR 45,000 each total PKR 270,000 before any extras.
Is E-max the same as every porcelain veneer?
No. E-max refers to a particular ceramic system. Ask your dentist to name the material and explain why it is recommended for your teeth.
Does the price include whitening or a night guard?
It depends on the clinic and your treatment plan. Request an itemised estimate that confirms whether these services are included, optional or separately charged.
Can I get a final veneer price without a consultation?
An advertised rate can give a starting point, but a final estimate should follow an examination of your teeth, gums and bite, plus an agreed plan for the number of veneers.
Can veneers replace missing teeth?
No. Veneers are attached to existing teeth. A missing tooth needs a separate assessment for options such as an implant or bridge.
Does Dr. Shahzad Mirza publish a veneer price list?
His veneer service page did not show a per-tooth fee when this guide was prepared. Contact the clinic for its current, case-specific written estimate.